Guangdong JieSen Sports Equipment Co.,Ltd

We are professional skateboard manufacturer in China with more than 10 years experience.We specialized in all kinds of skateboard, longboard, surfskate, wave board, balance board, swing board and related accessories etc.

E-mail: sales@jiesensports.com
Whats app: +86 13825746628 
Tel: +86 13603054972

Introduction about skateboard

A skateboard consists of four wheels attached to two axles called trucks. The trucks are mounted to the bottom of a wooden board called a deck.  Skateboard decks are usually made of seven layers of pressed Canadian maple veneer; these decks measure 31 inches long and 8 inches wide, featuring a rise at both ends.  The front rise is called a kicknose; the back is a kicktail.  The kicknose and kicktail provide leverage for boarders to perform tricks. The deck is usually topped with abrasive grip tape for traction. A truck is made of a base plate mounted to the deck and a hanger housing the axle. They are mounted 13 to 15 inches apart and made of lightweight aluminum, allowing the riders to shift weight and turn the skateboard. The urethane wheels on a skateboard are 50 to 65 mm in diameter and 65 mm wide. Protective equipment includes kneepads, elbow pads, wrist guards, gloves, and a helmet.

skateboard

In the Skateboard stance when riding, both feet are shoulder-width apart on the board. The rider may keep the front foot on the board while using the rear foot to push off the ground for increased speed. The board is turned by shifting body weight between the toe and heel.  A wheelie is performed by placing weight on the kicktail, and a kick turn is performed while rotating the board during a wheelie.  Aerials are advanced maneuvers performed by grabbing the side of the skateboard in the air after launching off a ramp or similar object.  An ollie is an aerial stunt in which the skater does not grab the board while in flight.  When the skater lands back on the board after it has flipped one or more times while airborne, this is called a board flip.  A grind is performed when one or more trucks are directed onto a curb, railing, pipe, or similar object, and the rider “rides” this object along the edge.

Skate parks many cities have skate parks that provide an enclosed environment with ramps, ledges, stairs, and half pipes for skaters to practice their tricks.  Half-pipes are shaped like a trough and allow riders to practice vertical or “vert” skating.  In vert skating, riders perform aerial tricks on each end of the pipe, as well as hand plants, foot plants, and flips.

Skateboarding competitions include freestyle, street, and vert categories.  In the freestyle competition, the skater must perform stunts and tricks on a flat surface.  Curbs, benches, stairs, handrails, boxes, and ramps are used in street competition.  Large half pipes or empty swimming pools are used in vert competition.  Some competitions also include slalom racing, in which skaters must maneuver through an obstacle course.

Latest articles